Soccer Ball Repair

First, the air must be let out of the ball. A seam is then cut opposite the valve and the old bladder is removed. The new bladder must now be glued in. For this, contact adhesive such as “Pattex Classic” is used. It is applied to both halves, allowed to dry, and then the two […]

When inflating a soccer ball, the ball needle is exposed to heavy loads. As a result, the thin needles can break off if they are in the ball. This is of course extremely bad … now all the air escapes from the ball and you can’t get the needle out! Patience and a bit of […]

Not every soccer ball is directly suitable for changing the valve. You can easily change the valve on all Adidas balls from 2014. In older models, it depends on whether the valve is exposed or is located under the top layer of the ball. Which balls are suitable directly? You can change the valve on […]

You need: • replacement valve • Ball pump • Repair kitBefore you think about changing the valve, you should check if the valve is broken. Instead, the ball could have a hole, or you use too thin a ball needle when inflating. The valve must be completely visible. If not, the ball must be prepared […]

The Correct Technique First, all the air must be let out of the ball. The bladder of the ball should not be near the seam to be sewn and may need to be pushed away. It is best to sew with a curved leather needle, but a straight needle will do in a pinch. The […]

You need:• ball pump• ball needle• Tire Fit / Fix-a-flat It is important that the ball is free of the foreign objects that caused the puncture! At first, you have to let the air out of the ball, so you can put the sealing into it. Not as extremely as in the picture. If no more air comes […]